itbrainpower.net
c-uGSM ** ARDUINO, BEAGLEBONE & RASPBERRY PI GSM/GPRS dual SIM shield (micro)



BLACK FRIDAY SALE! Order here: LTE modems (u-GSM), IoT shields w. LTE modems (xyz-mIoT) and sensors (s-Sense).

 

GSM SHIELD MODULE BOARD DUAL SIM (micro)- Arduino RASPBERY PI compatible : c-uGSM 1.13

Worldwide compatibility # Quad band 850/900/1800/1900MHz
GSM / GPRS / SMS / DTMF supported
Two standard size SIM*
RPI compatible built in USB interface
built in LiPol battery charger
1.25"x1.57"(31.75x39.88mm), around 10g implementation
ARDUINO & RASPBERRY PI I&II direct interfacing compatibility with auto 3-5V interfaces
Windows and Linux PC connectivity via USB
uFL or SMA F connector
High power analog audio inteface(out-700 mW RMS, in- capacitor MIC)
C and Python complex code examples
Ideal for small & medium series gadget / drones / wearables / IoT project integration where sizes and weights matters.

* single SIM active

c-uGSM v1.13 series revision 2 - ARDUINO & RASBERRY PI micro GSM shield / board, one of our latest released product, compact as 1.25"x1.57"(31.75x39.88mm) and with weight around 10g, it is probably the most compact GSM module board on market.
c-uGSM series it is pin to pin compatible with our 4G/LTE shield (l-LTE shield series), our 3G/UMTS version (d-u3G series), our single SIM GSM + BTH 3.0 nano shield (h-nanoGSM shield) and together, are parts of a bigger family based on "pluggable boards concept".

c-uGSM series has been released without performance compromises and brings to you the best market solution at reasonable cost and becomes the reference for this new product class. It is designed and manufactured in EUROPE by R&D Software Solutions team -awarded in 2006 with the GST SSC Bronze Award.

c-uGSM v1.13 series, in this compact format, integrates following main features:
  • USB serial conectivity adapter with RaspberryPI, Windows and Linux. The USB connection offers, for Raspberry PI usage, the posibility to leave free the serial connection for other application/shields as GPS.
  • 2.8-5V auto-level digital interfaces (UART TX+RX / RESET / POWER ON-OFF / RI / STS / RTS / CTS), for direct connection with Arduino boards, Raspberry PI or any other 2.8V up to 5V micro-controller board
  • build in Lithium Polimer battery charger. Depending on powering schema, all boards version can be used with or without LiPol battery.
  • Pluggable accesories as: switching power supply (stand alone or with LiPol usage), (future) u-controller boards, other.
  • POWER ON and RESET push micro switches.
  • TWO standard size SIM support* as default hardware.
  • uFL or SMA F antenna connector
  • POWER ON/OFF and RESET push micro switches

The c-uGSM series opens to you the access to a fully light weight, integrated, fully functional and affordable cellular GSM modem shield / platform. Smart complete design of the c-uGSM micro shield brings you the flexibility and easiness in integration, wherever your platform and application. Beyond ARDUINO / RASPBERRY PI / others hobby / DYI platforms integration, the c-uGSM series can be easily and in a time manner incorporated into your equipment regardless your previous experience in modem technology. The c-uGSM series represents your best choice for usage into a wide range of designs requiring a robust GSM mobile communication and reliable performance.

Manufactured in EU.

Part number Description Usage
CUGSM113#UFL quad band GSM module - equipped with u.FL connector Worldwide
CUGSM113#SMA quad band GSM module - equipped with SMA F connector Worldwide
 
Part number Accesories description
ihatGSM3G101B Raspberry PI[Zero, B+, II, II] HAT adapter board - connect the c-uGSM with the your RPI without wires
j328GSM3GLader102B Arduino Micro / Arduino Mini / Arduino Nano adapter board - connect the c-uGSM with the your Arduino Micro / Arduino Nano USB / ArduinoPro Mini (or othe compatible boards) without wires
fAUDIO102B Audio expander board - 2 x audio sockets bundle expander board
gSPS101#4V(DDRV) g-SPS 4V adapter board external plugable switching power supply, 5-25V input, 4V output, max 2A. 20.3x34.29mm. Use in "without LiPol/stand-alone" d-u3G boards configuration.
gSPS101#5V(LiPOL) g-SPS 5V adapter board external plugable switching power supply, 6-25V input, 5V output, max 2A. 20.3x34.29mm. Use in "with LiPol battery" d-u3G boards configuration, when main power supply voltage is bigger than 5V.
ITBP-EMB1-UFL#50 sticker embedded flex antenna 850Mhz->2250Mhz with u.FL and 50mm cable
ITBP-UFL-SMAF#100 u.FL to SMA female panel 100mm pigtail
ITBP-UFL-SMAF#085 u.FL to SMA female panel 85mm pigtail
ITBP-GSM-ANT-SMA90D#001 mini GSM/UMTS antenna, 0-1db, rod type, SMA F, 90 degree, no cable
ITBP-UFL-SMAF#085 u.FL to SMA female panel 85mm pigtail
 
   
Read about GSM SHIELD (micro) c-uGSM v1.13 features, hardware interfacing, docs and Arduino & RPI code examples
 

Order online c-uGSM shield
 
 
 
document version 1.04 / 2018-08-27 © R&D Software Solutions srl