OPT3002 breakout - Wide Optical Spectrum (300 nm to 1000 nm) sensor
BME688 breakout - bVoC, VSCs, temperature, humidity and pressure - air quality AI sensor
CCS811 + HDC2010 breakout - CO2, tVoC, temperature and humidity - air quality sensor
BME680 breakout - bVoC, temperature, humidity and pressure - air quality sensor
CCS811 breakout - carbon dioxide and tVoC - air quality sensor
BME280 breakout - temperature, humidity and pressure - environmental sensor
HDC2010 breakout - temperature and humidity - environmental sensor
BMP280 breakout - temperature and pressure - environmental sensor
|
What's the human mind without senses? Similar, what's the IoT without sensors support? Gas scanner? Digital nose? Specific smell detection? Artificial intelligence sensors? Air quality sensor? Environmental sensor? CO2? tVoC? bVoC? temperature? humidity? pressure? visible light?
This why we designed in 2019 our sensor series gathered under s-Sense name, all sharing the very same form factor [13 x 27mm] and the same interfaces.
s-Sense sensor breakout v1.02 common features:
-
compatible with Arduino [all 3.3V and 5V], xyz-mIoT shields, Raspberry PI [all versions] and other SBC / MCU Arduino [Beagle Bone, Teensy, ...]
-
power in with voltages between 3.3-5V [default],
-
I2C interface, 3.3-5V auto [default, the I2C reference voltage follows the power in voltage],
-
I2C reference voltage option via solder jumper [Eg.: power at 5V and I2C at 3.3V; power and I2C at 2.2V],
-
alternative sensor I2C addresses via solder jumpers,
-
big soldering pads on 2.54 mm [0.1"] pitch for standard row header / connector,
-
very light and slim - 13x27mm, around 2grams.
Arduino C, Raspberry PI [Python] software support.
Designed and manufactured in EUROPE by R&D Software Solutions. Released in 2019.
Following seven environmental, smell detection & air quality sensor breakout boards having I2C interface are now available. s-Sense I2C sensor breakout familly datasheet (pdf).
OPT3002 breakout - wide optical spectrum (300 to 1000 nm) sensor
PN: SS-OPT3002#I2C SKU: ITBP-6008 released: 2022
OPT3002 (manufactured by Texas Instruments) it is an light-to-digital sensor that provide the functionality of an optical power meter within a singledevice.
This optical sensor greatly improves system performance over photodiodes and photoresistors.
The measurement results are compensated for dark-current effects, as well as other temperature variations.
- wide spectral bandwidth 300 nm to 1000 nm.
- maesurement levels 1.2 nW/cm2 up to 10 mW/cm2
- built-in full-scale setting feature (auto scale)
- 23-bit effective dynamic range w. automatic gain ranging
- 12 binary-weighted, full-scale range settings: < 0.2% (typ) matching bw. ranges
- ambient range for operation -40 ~ +85C
- OPT3002 sensor datasheet
Go to OPT3002 breakout tech resources.
BME688 breakout - gas scaner, bVoC, VSC, temp., hum. and pres. - air quality sensor w. artificial intelligence
PN: SS-BME688#I2C SKU: ITBP-6007 released: 2021
BME688 (manufactured by Bosch Sensortec) is the first gas sensor with Artificial Intelligence (AI) and integrated high-linearity amd high-accuracy humidity and temperature sensors.
The integrated gas sensor it's able to detect Volatile Organic Compounds (VOCs), Volatile Sulfur Compounds (VSCs) and other gases as carbon monoxide (CO) and hydrogen in the ppb (part per billion) range.
- ambient range for operation -40 ~ +85C, 0%-100% r.H., 300-1100hPa
- gas sensor major outputs (via BSEC) IAQ, bVOC & CO2 equivalents (ppm), gas scan results (%) & intensity level
- sensor to sensor IAQ deviation +-15% / +-15IAQ
- relative humidity accuracy tolerance / hysteresis +-3% / <= 1.5%
- absolute temperature accuracy +-0.5C (at +25C)
- pressure sensitivity error +-0.25%
- BME688 sensor datasheet
The IAQ (Air quality index), target gas scaner selectivity, VOC, VSC and other features may be accesed using the "BSEC fusion library" provided by Bosch.
In order to learn how to fast install, configure and adapt this library, read our Bosch BSEC2 cookbook (Arduino BME688/680 sensor advanced tutorial).
Go to BME688 breakout tech resources.
Read BME688 breakout datasheet (pdf).
CCS811 + HDC2010 breakout - CO2, tVoC, temperature and humidity - air quality sensor
PN: SS-HDC2010+CCS811#I2C SKU: ITBP-6006
Equipped with AMS CCS811 and TI HDC2010 sensors. This sensor bundle provides probably one of the best air quality sensor available option.
CCS811 ( manufactured by AMS) is an ultra-low power digital gas sensor solution which integrates a metal oxide (MOX) gas sensor to detect a wide range of Volatile Organic Compounds (VOCs) for indoor air quality monitoring.
- equivalent CO2 range is 400ppm up to 29206ppm.
- equivavent TVOC (Total Volatile Organic Compound) output range is from 0ppb up to 32768ppb.
- ambient temperature range for operation -40 ~ +80C.
- CCS811 sensor datasheet
HDC2010 (manufactured by TI) is an low power and high accuracy integrated humidity and temperature sensor. The HDC2010 provides high accuracy measurement capability for a wide range of environmental monitoring applications and IoT such as smart thermostats, smart home assistants and wearables.
- relative humidity range 0% - 100%
- humidity accuracy +-2% (factory calibrated)
- temperature from -40C to +125C (functional) and -40C to +80C (operational)
- typical temperature accuracy +-0.2C (factory calibrated)
- embedded heating element to burn away condensation
- HDC2010 sensor datasheet
Go to CCS811 + HDC2010 breakout tech resources.
Read CCS811 + HDC2010 breakout datasheet (pdf).
BME680 breakout - gas bVoC, temperature, humidity and pressure - air quality sensor
PN: SS-BME680#I2C SKU: ITBP-6003
BME680 ( manufactured by Bosch Sensortec) is a high performance, digital, 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles and having very low power consumption.
- ambient range for operation -40 ~ +85C, 0%-100% r.H., 300-1100hPa
- resolution of gas sensor resistance measurement 0.05-0.11%
- bVOC tolerance/certificed accuracy 10-20% / 2-5%
- humidity accuracy +-3%
- absolute temperature (0-65C) accuracy +-1C
- absolute/relative pressure accuracy +-0.6hPa/+-0.12hPa
- BME680 sensor datasheet
Go to BME680 breakout tech resources.
Read BME680 breakout datasheet (pdf).
CCS811 breakout - CO2 and tVoC - air quality sensor
PN: SS-CCS811#I2C SKU: ITBP-6004
CCS811 ( manufactured by AMS) is an ultra-low power digital gas sensor solution which integrates a metal oxide (MOX) gas sensor to detect a wide range of Volatile Organic Compounds (VOCs) for indoor air quality monitoring.
- equivalent CO2 range is 400ppm up to 29206ppm.
- equivavent TVOC (Total Volatile Organic Compound) output range is from 0ppb up to 32768ppb.
- ambient temperature range for operation -40 ~ +80C.
- CCS811 sensor datasheet
Go to CCS811 breakout tech resources.
Read CCS811 breakout datasheet (pdf).
BME280 breakout - temperature, humidity and pressure - environmental sensor
PN: SS-BME280#I2C SKU: ITBP-6002
BME280 ( manufactured by Bosch Sensortec) is a high performance combined digital sensor with humidity, pressure and temperature measurement based on proven sensing principles and having low power consumption.
- ambient range for operation -40 ~ +85C, 0%-100% r.H., 300-1100hPa
- humidity accuracy +-3%
- absolute temperature (0-65C) accuracy +-1C
- absolute/relative pressure accuracy max. +-1.7hPa/+-0.12hPa
- BME280 sensor datasheet
Go to BME280 breakout tech resources.
Read BME280 breakout datasheet (pdf).
HDC2010 breakout - temperature and humidity - environmental sensor
PN: SS-HDC2010#I2C SKU: ITBP-6005
HDC2010 (manufactured by TI) is an low power and high accuracy integrated humidity and temperature sensor. The HDC2010 provides high accuracy measurement capability for a wide range of environmental monitoring applications and IoT such as smart thermostats, smart home assistants and wearables.
- relative humidity range 0% - 100%
- humidity accuracy +-2% (factory calibrated)
- temperature from -40C to +125C (functional) and -40C to +80C (operational)
- typical temperature accuracy +-0.2C (factory calibrated)
- embedded heating element to burn away condensation
- HDC2010 sensor datasheet
Go to HDC2010 breakout tech resources.
Read HDC2010 breakout datasheet (pdf).
BMP280 breakout - temperature and pressure - environmental sensor
PN: SS-BMP280#I2C SKU: ITBP-6001
BMP280 ( manufactured by Bosch Sensortec) is a combined digital sensor with with temperature and pressure measurement based on proven sensing principles and having low power consumption.
- ambient range for operation -40 ~ +85C, 300-1100hPa
- absolute temperature (0-65C) accuracy +-1C
- absolute pressure accuracy max. +-1.7hPa
- BMP280 sensor datasheet
Go to BMP280 breakout tech resources.
Read BMP280 breakout datasheet (pdf).
|