itbrainpower.net
s-Sense ** CO2, VOC, temperature, humidity, pressure ** air quality sensors for IoT


Half a century Apollo 11 Moon landing anniversary - LTE modems at half price promotion - one pcs. per order.

 

CCS811 + HDC2010 I2C sensor breakout : air quality CO2 (carbon dioxide) tVoC (total volatile organic compounds) temperature humidity : Arduino and RaspberryPI compatible : s-Sense by itbrainpower.net

CCS811 + HDC2010 breakout - CO2, tVoC, temperature and humidity - air quality sensor


BME680 I2C sensor breakout : air quality bVoC (body volatile organic compounds) duino and RaspberryPI compatible : s-Sense by itbrainpower.net

BME680 breakout - bVoC, temperature, humidity and pressure - air quality sensor


CCS811 I2C sensor breakout : air quality CO2 (carbon dioxide) tVoC (total volatile organic compound) : Arduino and RaspberryPI compatible : s-Sense by itbrainpower.net

CCS811 breakout - carbon dioxide and tVoC - air quality sensor


BME280 I2C sensor breakout : environmental sensor temperature humidity pressure : Arduino and RaspberryPI compatible : s-Sense by itbrainpower.net

BME280 breakout - temperature, humidity and pressure - environmental sensor


HDC2010 I2C sensor breakout : environmental sensor temperature humidity : Arduino and RaspberryPI compatible : s-Sense by itbrainpower.net

HDC2010 breakout - temperature and humidity - environmental sensor


BMP280 I2C sensor breakout : environmental sensor temperature pressure : Arduino and RaspberryPI compatible : s-Sense by itbrainpower.net

BMP280 breakout - temperature and pressure - environmental sensor


 

What's the human mind without senses? Similar, what's the IoT without sensors support? Air quality sensor? Environmental sensor? CO2? tVoC? bVoC? temperature? humidity? pressure?

This why we designed our sensor series gathered under s-Sense name, all sharing the very same form factor [13 x 27mm] and the same interfaces.

s-Sense sensor breakout v1.02 common features:
  • compatible with Arduino [all 3.3V and 5V], xyz-mIoT shields, Raspberry PI [all versions] and other SBC / MCU Arduino [Beagle Bone, Teensy, ...]
  • power in with voltages between 3.3-5V [default],
  • I2C interface, 3.3-5V auto [default, the I2C reference voltage follows the power in voltage],
  • I2C reference voltage option via solder jumper [Eg.: power at 5V and I2C at 3.3V; power and I2C at 2.2V],
  • alternative sensor I2C addresses via solder jumpers,
  • big soldering pads on 2.54 mm [0.1"] pitch for standard row header / connector,
  • very light and slim - 13x27mm, around 2grams.

Arduino C, Raspberry PI [Python] software support.

Designed and manufactured in EUROPE by R&D Software Solutions. Released in 2019.


For now, following six environmental & air quality sensor breakout boards having I2C interface are available.

CCS811 + HDC2010 breakout - CO2, tVoC, temperature and humidity - air quality sensor

CCS811 + HDC2010 sensor bundle - top CCS811 + HDC2010 sensor bundle - bottom
PN: SS-HDC2010+CCS811#I2C   SKU: ITBP-6006

Equipped with AMS CCS811 and TI HDC2010 sensors. This sensor bundle provides probably one of the best air quality sensor available option.

CCS811 ( manufactured by AMS) is an ultra-low power digital gas sensor solution which integrates a metal oxide (MOX) gas sensor to detect a wide range of Volatile Organic Compounds (VOCs) for indoor air quality monitoring.
- equivalent CO2 range is 400ppm up to 29206ppm.
- equivavent TVOC (Total Volatile Organic Compound) output range is from 0ppb up to 32768ppb.
- ambient temperature range for operation -40 ~ +80C.
- CCS811 datasheet

HDC2010 (manufactured by TI) is an low power and high accuracy integrated humidity and temperature sensor. The HDC2010 provides high accuracy measurement capability for a wide range of environmental monitoring applications and IoT such as smart thermostats, smart home assistants and wearables.
- relative humidity range 0% - 100%
- humidity accuracy +-2% (factory calibrated)
- temperature from -40C to +125C (functional) and -40C to +80C (operational)
- typical temperature accuracy +-0.2C (factory calibrated)
- embedded heating element to burn away condensation
- HDC2010 datasheet

Go to CCS811 + HDC2010 breakout tech resources.

BME680 breakout - gas bVoC, temperature, humidity and pressure - air quality sensor

BME680 sensor breakout - top BME680 sensor breakout - bottom
PN: SS-BME680#I2C   SKU: ITBP-6003

BME680 ( manufactured by Bosch Sensortec) is a high performance, digital, 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles and having very low power consumption.
- ambient range for operation -40 ~ +85C, 0%-100% r.H., 300-1100hPa
- resolution of gas sensor resistance measurement 0.05-0.11%
- bVOC tolerance/certificed accuracy 10-20% / 2-5%
- humidity accuracy +-3%
- absolute temperature (0-65C) accuracy +-1C
- absolute/relative pressure accuracy +-0.6hPa/+-0.12hPa
- BME680 datasheet

Go to BME680 breakout tech resources.

CCS811 breakout - CO2 and tVoC - air quality sensor

CCS811 sensor breakout - top CCS811 sensor breakout - bottom
PN: SS-CCS811#I2C   SKU: ITBP-6004

CCS811 ( manufactured by AMS) is an ultra-low power digital gas sensor solution which integrates a metal oxide (MOX) gas sensor to detect a wide range of Volatile Organic Compounds (VOCs) for indoor air quality monitoring.
- equivalent CO2 range is 400ppm up to 29206ppm.
- equivavent TVOC (Total Volatile Organic Compound) output range is from 0ppb up to 32768ppb.
- ambient temperature range for operation -40 ~ +80C.
- CCS811 datasheet

Go to CCS811 breakout tech resources.

BME280 breakout - temperature, humidity and pressure - environmental sensor

BME280 sensor breakout - top BME280 sensor breakout - bottom
PN: SS-BME280#I2C   SKU: ITBP-6002

BME280 ( manufactured by Bosch Sensortec) is a high performance combined digital sensor with humidity, pressure and temperature measurement based on proven sensing principles and having low power consumption.
- ambient range for operation -40 ~ +85C, 0%-100% r.H., 300-1100hPa
- humidity accuracy +-3%
- absolute temperature (0-65C) accuracy +-1C
- absolute/relative pressure accuracy max. +-1.7hPa/+-0.12hPa
- BME280 datasheet

Go to BME280 breakout tech resources.

HDC2010 breakout - temperature and humidity - environmental sensor

HDC2010 sensor breakout - top HDC2010 sensor breakout - bottom
PN: SS-HDC2010#I2C   SKU: ITBP-6005

HDC2010 (manufactured by TI) is an low power and high accuracy integrated humidity and temperature sensor. The HDC2010 provides high accuracy measurement capability for a wide range of environmental monitoring applications and IoT such as smart thermostats, smart home assistants and wearables.
- relative humidity range 0% - 100%
- humidity accuracy +-2% (factory calibrated)
- temperature from -40C to +125C (functional) and -40C to +80C (operational)
- typical temperature accuracy +-0.2C (factory calibrated)
- embedded heating element to burn away condensation
- HDC2010 datasheet

Go to HDC2010 breakout tech resources.

BMP280 breakout - temperature and pressure - environmental sensor

BMP280 sensor breakout - top BMP280 sensor breakout - bottom
PN: SS-BMP280#I2C   SKU: ITBP-6001

BMP280 ( manufactured by Bosch Sensortec) is a combined digital sensor with with temperature and pressure measurement based on proven sensing principles and having low power consumption.
- ambient range for operation -40 ~ +85C, 300-1100hPa
- absolute temperature (0-65C) accuracy +-1C
- absolute pressure accuracy max. +-1.7hPa
- BMP280 datasheet

Go to BMP280 breakout tech resources.

 
 

More info:   CCS811 + HDC2010 combo sensors breakout   BME680 sensor breakout CCS811 sensor breakout   BME260 sensor breakout   HDC2010 sensor breakout   BMP280 sensor breakout  

Order online s-Sense air quality and environmental sensor breakout boards

 
 
document version 0.924 / 2019-07-01 © R&D Software Solutions srl